mFL.12 sensor render from the OQOMETHI poster

mFL-12

Unattended above-water fluorescence measurements in a 1.75 kg instrument

The mFL-12 is installed above the water for unattended fluorescence measurements at user-defined intervals. A modulated 405 nm source and a 400–880 nm receiver separate the laser-induced signal from ambient light, allowing operation by day or night. Measurements can be transmitted to the Microsensor Viewer for processing, quality control, and review. The instrument is at TRL 7–8 and was field-tested during ESA's PHY2FLEX campaign in Venice in 2025.

Measures

Measurement channels

The receiver separates each reported parameter by its optical process and its position in the return spectrum

400 500 600 700 800 nm return 405 EXCITATION, NM Chlorophyll-a and CDOM 685
mFL-12, excitation and return bands across the 400–880 nm reception window

Chlorophyll-a and CDOM

Estimates chlorophyll-a and CDOM concentration from a fixed or moving surface platform

Process
Active LIF (ON/OFF)
Band
405 / 685 nm

Total suspended matter

Estimates total suspended matter at outfalls, river mouths, port basins, and monitoring stations

Process
Active LIF (ON/OFF)
Band
405 nm excitation

Petroleum

Detects surface films and oil-in-water emulsions from an above-water installation

Process
Above-water active LIF
Band
405 nm excitation

Ambient-light rejection

Alternating laser-on and laser-off measurements isolates the fluorescence signal for day-and-night operation

Process
ON/OFF sunlight rejection
Platforms

Compatible deployment platforms

Mounting and integration are specified for the instrument and survey method

Moored buoy

Long-duration above-water installation

Telemetry with a configurable duty cycle

Pier / bridge

Fixed above-water installation

Unattended operation on mains or battery power

Vessel

Deck or rail installation

Measurements underway or on station

USV

Deck-mounted payload

Uncrewed transect measurements

Fixed coastal station

Permanent above-water installation

Long-term monitoring in exposed conditions
Datasheet

Specifications

Optical

Excitation
405 nm, single, modulated
Reception
hyperspectral, 400–880 nm, 288 bands
Spectral resolution
12 nm
Detection rate
up to 1 Hz, ambient-light dependent
Detector FOV

Electronics

ADC
12-bit
Integration time
270 µs – 1 s
Comms
RS485 / Wi-Fi / 4G/5G
Internal logging
up to 512 GB
Position
GPS + IMU
Context
integrated camera

Mechanical

Protection
IP68, marine-grade
Size / mass
130 × 140 × 121 mm, 1.75 kg

Electrical

Power
12 V DC, 12 W peak, optional solar panel
Contact

Discuss a mFL-12 deployment

The engineering team handles quotations, mounting requirements, and integration questions

info@lifelidar.com +33 7 80 72 60 72 Sophia Antipolis, Valbonne, France
We use the information you provide to answer your enquiry. See our privacy notice for details.